D-Link DWR-720/PW User Manual page 40

How to connect to a wireless network
-Once Wi-Fi has been turned on, you will see a list of available wireless networks in your area
-To connect to a wireless network, scroll up or down and highlight the name of the network you want to
connect to, select [OK]  [Connect to network]
-To make entering the password easier, first scroll down to [Show password] and press the [Left Soft key].
This will display the password as you type
-Press up and enter the wireless password into the password field. You can change the input method by
pressing the # key or input special characters with the ✲ key
-Once the password is entered correctly, scroll down to [Connect] and press the [Left Soft key]
-You can enable [Show advanced options] if you have settings for Proxy or IPv4 settings
displayed on the top bar
-If your router supports WPS function, you can use [OK]  [WPS Push Button] function to connect
-To disconnect from the wireless network, you can either turn off the Wi-Fi or [Forget network]
-If your wireless network is hidden, you will need to use the [Add network] function
To access advance settings, press [OK]  [Advanced]. You can view your details such as MAC address / IPv4 address here.
Network notification:
notification tone when there are available wireless networks in the area.
Keep Wi-Fi on during sleep:
Back to Table of Contents
-Once successfully connected, the selected wireless network will show Connected and a wireless icon will be
Advanced settings
Enable this feature for the phone to display the Wi-Fi Network available Icon and send out a
This can be set to Always / Only when plugged in / Never
40