D-Link DWR-720/PW User Manual page 38

3. Change barring password: You can change/set a pin on this feature prevent tampering. You will be prompted for the password,
press down and select [OK] to save. You will be required to enter and confirm a new password, press down and select [OK] to save.
At any stage you can select [Cancel] to exit.
Additional settings:
contact your network operator for setup of this feature.
1. Caller ID: You can set the CLI of the phone to display: [Network default], [Hide number], [Show number]. Press [Left soft key] to
save or [Right soft key] to cancel.
2. Call waiting: Enable/Disable to notify you of a new incoming call when you on an existing call. This feature must be enabled before
the phone can receive any additional incoming call. If disabled, new caller will be prompted that "the number you have dialled does
not exist, please redial carefully"
Enable FDN:
This feature is network independent; you will be required to enter the SIM PIN2 to unlock the service. Contact
your mobile operator for assistance.
Change PIN2:
You can change your current SIM PIN2. You will be required to enter your current PIN2 before you can set a
new PIN2.
FDN list:
When FDN is enabled, only numbers or prefixes listed here can be called to. Press [OK] and select [Add contact]. Enter
the Name and Number of the contact which can receive outgoing calls.
Back to Table of Contents
Here you can see settings for Caller ID and Call waiting. This feature is network independent. Please
Fixed Dialling Number settings
38