Remote Start; Activate Remote Start; Deactivate Remote Start; Over-The-Air Update - Electrolux EDH903BEWA User Manual

may takes about 45 seconds before it is
ready. When the wireless module is
ready, the text
to inform you, that the access point will
be open for about 3 minute.
4. Configure the Electrolux Life app on
your smart device.
5. If the connectivity is configured,
(Access Point) symbol is off and the
icon will stop blinking and lit
steadily to confirm that the
configuration was successful.
Every time you switch
the appliance on, the
appliance takes 45
seconds to connect to
the network
automatically. When the
indicator
blinking the connection
is ready.
To switch the wireless connection
off,Press and hold
button for 3 seconds until the first
acoustic signal:
display.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless
credentials,Press and hold
touch button for 10 seconds until the
second acoustic signal:
appears on the display.
6.3

Remote Start

When the App is installed and the
wireless connection is complete, you can
start and stop a drying programme
remotely by activate remote start.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a drying
programme
(Access Point) is on
stops
Remote touch
appears on the
Remote

Activate Remote Start

1. Press the Remote button and the
indicator
display.
2. Press the Start/Pause button to
activate the Remote Start.
The indicators
display. Now it is possible to start the
programme remotely.

Deactivate Remote Start

Press the Remote touch button and
confirm by pressing the Start/Pause
button.
The icon is off and the remote start is
deactivated.
If the door is open, the
Remote Start is
deactivated.

6.4 Over-the-air update

The App may propose an update for
downloading new features.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
ENGLISH
appears on the
appears on the
11