Lennox Baltic BCK 020 Installation, Operating And Maintenance page 149

Warranty
TERMS AND CONDITIONS
In the absence of any other written agreement, the
guarantee shall only apply to design faults which occur
within a 12 month period (warranty period).
The warranty period starts on the date of commissioning
and at the latest six months after the delivery of the
Rooftop.
ANTI-CORROSION WARRANTY
10 year warranty terms and conditions for corrosion
to the Rooftop casing:
Lennox shall guarantee the casing of its Rooftop units
manufactured since May 1991 against corrosion for 10
years commencing from the date of delivery of the
material.
The warranty shall not apply in the following cases:
1.If the corrosion of the casing is caused by external
damage to the protective layer such as scratches,
projections, abrasion, impacts etc...
2.If the casing is not kept continually clean in the
course of maintenance work or by a specialist
company,
3.If the casing is not cleaned and maintained in
accordance with regulations,
4.If the Rooftop units are installed on a site or in an
environment which is known to be corrosive, unless
a special protective coating has been applied by the
owner for these applications, which has been
recommended by a competent body not linked to
the owner and after carrying out a study of the site.
5.Nevertheless the LENNOX coating is highly
resistant to corrosion, the warranty will not be
applied for rooftop installed at less than 1000m
away from the sea
Note : With the exception of the casing, the rest of the
machine is covered by the warranty of our general terms of
sale.
Page 148 - IOM / ROOFTOP BALTIC Series - 0704 - E
DO NOT CONFUSE THE WARRANTY
WITH MAINTENANCE
The warranty will only apply if a maintenance contract has
been signed, starting from the date of commissioning, and
if the maintenance contract has actually been performed.
The maintenance contract must be made with a specialist,
competent company.
The sole effect of any repair, modification or replacement of
an item during the warranty period must be to extend the
material's warranty period.
Maintenance must be carried out in accordance with
regulations.
If a spare part is supplied after the expiry of the warranty
period, it shall be guaranteed for a period equal to the
initial warranty period and will be subject to the same
conditions.
We recommend for a contract four inspections per year
(every three months), before the start of each season, in
order to check the operation of the equipment in the
various operating modes.