Attaching The Input Adaptor - Sony LMD-1950MD Instructions For Use Manual

3
Insert the DC IN connector into the DC IN socket
on the bottom of this unit until it locks.
To remove the AC power cord
First, pull out the AC plug holder while pressing the lock
levers.
Next, pull out the DC IN connector from the DC IN
socket while pressing the lock lever.
Attaching the Input
Adaptor
Before attaching the input adaptor, disconnect the power
cord.
Attach the input adaptor to the optional input slot after
removing the panel of the slot.
1
Remove the panel of the optional input slot.
2
Insert the input adaptor into the slot.
3
Tighten the screws.
13

Attaching the Input Adaptor