Bottom - Sony LMD-1950MD Instructions For Use Manual

Bottom

a COMPOSITE input connector (BNC)
Input connector for composite signals.
b Y/C input connector (4-pin mini-DIN)
Input connector for Y/C signals.
c G/Y input connector (BNC)
Input connector for G of RGB and component Y
(luminance) signals.
d B/P
input connector (BNC)
B
Input connector for B of RGB signals and P
difference) of component signals.
e R/P
input connector (BNC)
R
Input connector for R of RGB signals and P
difference) of component signals.
f EXT SYNC (External sync) input connector
(BNC)
When this unit operates on an external sync signal,
connect the reference signal from a sync generator to
this connector.
Select "EXT" in "SYNC" of the USER CONFIG menu
(on page 21) to use the sync signal through this
connector.
Note
When inputting a video signal with the jitters, etc. the
picture may be disturbed. We recommend using the
TBC (time base corrector).
1 2 3 4 5 6
8 9 0
g Optional input slots
An optional input adaptor can be attached according to
your requirements. Press the INPUT key to select the
signals.
h
Connects the equipotential plug.
I (function earth) terminal
Connects the earth cable.
(blue color i DC IN socket
B
Connect the supplied DC connector of the AC adaptor.
j Loop-through output connectors
(red color
The signals input to the input connectors (1, b, c,
R
d, e and f) are output here. Connect to the
equipment according to the input signal.
When the cable is connected to this connector, the 75-
ohm termination of the input automatically released, and
the signal from the input connector is output from this
connector.
k DVI input connector (DVI-D)
DVI Rev.1.0 applicable digital RGB signal is input.
To view SXGA signals when the DVI input is selected,
use the cable within 3 m (118
l HD15 input connector (HD D-Sub 15 pin)
An analog RGB video signal (0.7 Vp-p, positive
polarity) and sync signal are input.
The Plug & Play function corresponds to DDC2B.
7
qa qs qd
/I (Equipotential/Function Earth) terminal
(equipotential) terminal
Location and Function of Parts and Controls
qf
1
inches) in length.
/8
11