Selecting The Sound Position; My Best Sound Position (Mbp); Setting The Equalizer - Sony XR-CA600V Operating Instructions Manual

Selecting the sound position

— My Best sound Position (MBP)

When you drive without passengers, you can
enjoy the most comfortable sound environment
with "My Best sound Position."
"My Best sound Position" has two presets, which
adjust the sound level of balance and fader. You
can select one very easily with the MBP button.
Balance Level
Display
window
Right
MBP-A
– 4dB
MBP-B 0
MBP-OFF 0
Press (MBP) repeatedly for the desired
listening position.
The mode of "My Best sound Position" is
shown in the display in order of the table.
After one second, the display goes back to the
normal playback mode.
If you want to adjust the sound level of
balance and fader more precisely, you can do
it using the (SOUND) button (see "Adjusting
the sound characteristics" on page 17).
Notes
• When the BAL (balance) or FAD (fader) in "Adjusting
the sound characteristics" (page 17) is adjusted, the
MBP setting returns to OFF.
• When MBP is set to OFF, the BAL and FAD setting is
activated.
Fader Level
Left Front Rear
0 0 – 4dB
– 4dB 0 – 4dB
0 0 0

Setting the equalizer

You can select an equalizer curve for seven
music types (XPLOD, VOCAL, CLUB, JAZZ,
NEW AGE, ROCK, CUSTOM, and OFF
(equalizer OFF)).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(radio, CD, MD, or tape).
2
Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "OFF."
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1
Press (MENU).
2
Press either side of (DISC/PRESET) or
(PRESET) repeatedly until "EQ7
TUNE" appears, then press (ENTER).
3
Press either side of (SEEK) to select
the desired equalizer curve, then
press (ENTER).
Each time you press (SEEK), the item
changes.
continue to next page t
19