Cassette Player; Listening To A Tape - Sony XR-C7500RX Operating Instructions Manual
Fm/mw/lw cassette car stereo
Hide thumbs
Also See for XR-C7500RX:
- Service manual (52 pages) ,
- Service manual (54 pages) ,
- Operating instructions manual (164 pages)
Table of Contents
Advertisement
Available languages
Available languages
Cassette Player
Listening to a tape
1
Press (OPEN) and insert a cassette.
Playback starts automatically.
2
Close the front panel.
If a cassette is already inserted, to start
playback, press (SOURCE) repeatedly until
“FWD” or “REV” appears.
The side facing up is played.
The side facing down is played.
Tip
To change the tape‘s playback direction, press
(MODE) (o).
To
Press
(OFF)
Stop playback
(OPEN) then Z
Eject the cassette
Fast-winding the tape
During playback, press and hold either
side of (SEEK/AMS).
Fast-forward
Rewind
To start playback during fast-forwarding or
rewinding, press (MODE) (o).
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) momentarily for each track
you want to skip.
You can skip up to nine tracks at one time.
To locate
To locate
succeeding
preceding
tracks
tracks
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds
— there is noise between tracks
— there are long sections of low volume or quiet
sections.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 30.)
Page 10
Advertisement
Chapters
Table of Contents
