Other Functions; Labelling The Rotary Commander; Using The Rotary Commander - Sony XR-C5110R Operating Instructions Manual

Other Functions

You can also control the optional CD or MD
units with the rotary commander*.
* Supplied for XR-C4120, optional for XR-C5120R/
C5110R
Labelling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
D S P L
M O D E
S O U N D
14
S O U N D
M O D E
D S P L
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
(the SOURCE and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
TUNER n CD* n MD* n TAPE
Pressing (MODE) changes the operation
in the following ways;
• Tape : playback direction
• Tuner : FM1 n FM2 n FM3 n MW
n LW
• CD unit* : CD1 n CD2 n ...
• MD unit* : MD1 n MD2 n ...
* If the corresponding optional equipment is
not connected, the item will not appear.
Tip
When the POWER SELECT switch is set to position
B, you can turn on this unit by pressing (SOURCE)
on the rotary commander.
(MODE)