Cisco Firepower 2100 Series Hardware Installation Manual page 36

Power Cord Specifications
PID
FPR-MSP-SSD=
FPR2K-FAN
FPR2K-FAN=
FPR2K-NM-8X10G
FPR2K-NM-8X10G=
FPR2K-NM-BLANK
FPR2K-NM-BLANK=
FPR2K-CBL-MGMT
FPR2K-CBL-MGMT=
FPR2K-RM-BRKT=
FPR2K-SLIDE-RAILS
FPR2K-SLIDE-RAILS=
FPR2K-RAIL-BRKT=
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the security appliance. The jumper power cords for use in racks are available as an optional
alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note
Only the approved power cords or jumper power cords provided with the security appliance are supported.
The following power cords are supported.
Cisco Firepower 2100 Series Hardware Installation Guide
32
Description
MSP SSD (spare)
Fan tray for the Firepower 2130 and 2140
Fan tray for the Firepower 2130 and 2140 (spare)
8-port 10-G SFP+ network module
8- port 10-G SFP+ network module (spare)
Network module blank slot cover
Network module blank slot cover (spare)
Cable management brackets
Cable management brackets (spare)
Rack-mount brackets (spare)
Slide rail kit
Slide rail kit (spare)
Slide rail brackets (spare)
Overview