Parameters - Siemens SIMATIC ET 200AL Manual

Parameters/address space

4.2 Parameters

4.2 Parameters
Parameters of the analog input module AI 4xU/I/RTD 4xM12
The table below lists the parameters that can be set. The effective range of the parameters
that can be set depends on the type of configuration. The following configurations are
possible:
● Distributed operation on PROFINET IO
● Distributed operation with PROFIBUS DP
NOTICE
Match of encoder and parameters
The default setting of the analog inputs is voltage measurement (1 V to 5 V).
Make sure that the connected encoders and the selected parameters match.
The connected encoder can be destroyed in the case of incorrect parameters.
The table below shows the PROFINET and PROFIBUS parameters for the analog input
module AI 4xU/I/RTD 4xM12 for configuration with GSD file.
Explanation of abbreviations in table below:
4-DMU
2-DMU
R-3L
R-2L
RTD-3L
RTD-2L
20
4-wire transducer
2-wire transducer
Resistance 3-wire transducer
Resistance 2-wire transducer
Resistance thermometer 3-wire transducer
Resistance thermometer 2-wire transducer
Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)
Manual, 08/2018, A5E32350124-AD