ELECTRICAL CONNECTION (220-240 VOLTS)
The appliance is supplied with a standard 7.5 Amp service
cord terminated by a 3-pin plug for connection to a standard
household socket. The electrical supply is required to power
the electronic ignition system.
NOTE! It will be necessary for servicing purposes to
disconnect the electrical power supply. The power
point should therefore be accessible after the appliance
is installed, as specified in the local wiring regulations.
Diagram 1 is a schematic of the wiring in the appliance.
WEIGHT of the unit is printed on the appliance
Diagram 1a – All models except EHG313BD
Diagram 1b – model EHG313BD
TO BURNER SPARK PLUGS
TO BURNER SPARK PLUG