500 Amp Battery Disconnect Switch: FR1046 The Big Switch 500 with Lock-Out Bracket FR1046LED The Big Switch 500 with Lock-Out Bracket & LED Indicator FR1047 The Big Switch 500 Lock-Out Hole with Lever Handle w/ Retrofit Diamond Bracket Voltage 12V/24V...
Page 3
10....Hex Nut for Terminal Stud .............. 2 11 ....Lock Washer for Terminal Stud ............. 2 12....Flat Washer for Terminal Stud ............2 FR1047 FR1046 (Lock not Included) FR1047 FR1046LED FR1046 Flaming River Industries 1-800-648-8022 P/N 102606 • Rev A • 06/06/17...
Page 4
3.15” (80 mm) or 3.94” (100 mm) spacing. 3. Install the switch in the vehicle and the lever style handle (G) onto the top of the switch shaft with the supplied phillips head screw. Flaming River Industries 1-800-648-8022 P/N 102606 • Rev A • 06/06/17...
(recommended, but not included) should be applied to the switch terminals. 4. Make sure the The Big Switch 500 is turned to the OFF position. Connect the load-side cable to the required point on your vehicle FIRST. Hook up the cable that connects directly to the battery terminals SECOND.
Page 7
HOUSING (7-10 FT. LBS Max..) LED Only THIS WILL VOID WARRANTY Black (pos.) Positive or Negative Connect Connect Terminal Second First To Vehicle Load Cable Cable Battery Nickel-Plated Brass Fasteners Flaming River Industries 1-800-648-8022 P/N 102606 • Rev A • 06/06/17...
Page 8
Improper installation, abuse, racing, and/or modification of the products voids this warranty. No warranty of merchantability or fitness for a particular purpose is made by Flaming River® with respect to any of its products. Warnings and Recommendations It is the customer’s responsibility to determine the suitability of a given Flaming River®...