Advertisement
DAILY CLEANING (Continued)
STEP 5
Remove the faucet handle/
stem assembly by unscrew-
ing the faucet nut just behind
the faucet handle.
STEP 9
Remove the drip tray and
drip tray cover. Thoroughly
wash in a mild detergent
and water solution. Rinse
the parts in hot water.
USE & CARE INSTRUCTIONS for ThermoFresh
STEP 6
Use cleaning brush supplied
with the server to thoroughly
clean the fill tube of the lid
assembly and the faucet
spout.
STEP 10
Reassemble the faucet and
attach it to the dispenser.
When reassembling - CAU-
TION: DO NOT over-tight-
en faucet bonnet - HAND
TIGHTEN ONLY.
with DIGITAL SIGHT GAUGE
STEP 7
Wash the entire outside sur-
face of the lid assembly with
a mild detergent and water
solution and rinse with hot
water. Do not submerge.
NOTE: Thoroughly cleaning
the lid assembly fins will
prevent inaccurate level
readings.
STEP 11
Thoroughly clean all coffee
residue from the contacts
between the server lid and
the digital sight gauge. If
the sight gauge is removed
for cleaning, do not lose the
thumbscrews.
SERVER
®
STEP 8
Disassemble the faucet/
stem assembly. Thoroughly
wash all faucet parts, drip
tray and cover in a mild
detergent and water solu-
tion. Rinse the parts in hot
water. Sanitize the parts for
five minutes, then air dry
completely.
STEP 12
Wash the entire outside
surface of the server with a
clean damp cloth. Do NOT
clean this equipment with a
water jet device.
39483.2 092116
Advertisement
