To Skip A Chapter/Track/Scene/File (Press); Reverse/Fast-Forward Disc; Momentarily); Reverse/Fast-Forward Track; (Press And Hold) - Sony MEX-DV1100 Operating Instructions Manual

G PICTURE EQ button 27
To select the picture quality.
H u (Play/Pause) button 16, 17, 18, 19,
21
To start/pause playback.
I .m/M> buttons 17, 19, 20,
21
Disc:

To skip a chapter/track/scene/file (press);

reverse/fast-forward disc (press and hold

momentarily); reverse/fast-forward track

(press and hold).*

2

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

J SRC (Source) button 20, 34, 46
To power on; change the source (Radio/Disc/
AUX).
K MODE button 20, 34, 46

To select the radio band (FM/MW/LW);

select an auxiliary device*

L ATT (Attenuate) button
To attenuate the sound (to cancel, press
again).
M DVD playback setting buttons
(AUDIO): 17, 25
To change the audio language/format.
(For VCD/CD/MP3/WMA, to change the
audio channel.)
(SUBTITLE): 17
To change the subtitle language.
(ANGLE): 17
To change the viewing angle.
(TOP MENU): 17
To open the top menu on a DVD.
(MENU): 17
To open the menu on a disc.
N VISUAL SETUP button 22, 25, 26, 27,
28, 30, 31, 33, 34, 38
To open the play mode/visual setup menu.
O DSPL (Display) button 24, 35, 45

To change display items.

P O (Return) button 22, 23, 28, 29, 33,
38
To return to the previous display; return to
the menu on a VCD*
3 .
4 .
Q </M/m/, (Cursor)/ENTER buttons
To move the cursor and apply a setting.
R m (Microphone) button 31
To activate the karaoke mode.
S VOL (Volume) +/– buttons 36
To adjust the volume.
T AF (Alternative Frequencies)/TA
(Traffic Announcement) button 35, 36
To set AF and TA in RDS.
*1 When a Super Audio CD/CD/MP3/WMA/JPEG/
DivX is played.
*2 Operation differs depending on the disc (page 17,
19).
*3 When two auxiliary devices are used.
*4 When playing with PBC function.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the main unit is pressed, or a
disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 50.
13