Table of Contents
Advertisement
To Use Alarm
When a programmed Alarm goes off, it will blink. The Sound
and Vibrator may also go on. This is reminding you to take the
dose you scheduled for that time and stored in the
corresponding compartment. Acknowledge this by pressing
the corresponding Number key.
If the Alarm is not acknowledged, Sound and Vibrator will stop
after 10 minutes. Alarm will continue to blink. If it is still not
acknowledged for up to 1 hour, it will be marked with a X. This
indicates you have missed the time you had scheduled to take
your dose.
The Next Alarm will be displayed after a Missed Alarm or an
acknowledgment. If there are no more Alarms for the day, 0:00
Alarm Time will be displayed.
Helpful hints
Press any Number Key for quick view of that Alarm Time.
Alarm t
imes are in 10 Min intervals to speed up process.
To set Alarm to ZERO, press number twice during Alarm Time
set up process.
st
At midnight, 1 Alarm of the day will be displayed. All Missed
pills are reset.
Advertisement
Table of Contents
