Listening To Music On A Mass Storage Class Type Audio Device; Listening To Music On A "Walkman" (Atrac Audio Device); Bluetooth Function; Bluetooth Operations - Sony Bluetooth 3-299-319-12 (1) Operating Instructions Manual

Listening to music on a Mass
Storage Class type audio device
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select
TRACK
ALBUM
SHUF ALBUM
SHUF DEVICE
To return to normal play mode, select "
or "SHUF OFF."
Listening to music on a "Walkman"
(ATRAC Audio Device)
1
During playback, press (MODE)
repeatedly until the desired setting
appears.
The item changes as follows:
ALBUM t TRACK t GENRE t
PLAYLIST t ARTIST
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select
TRACK
ALBUM
ARTIST
PLAYLIST
GENRE
SHUF ALBUM
SHUF ARTIST
SHUF PLAYLIST
SHUF GENRE
SHUF DEVICE
To return to normal play mode, select "
or "SHUF OFF."
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
OFF"
To play
track repeatedly.
album repeatedly.
artist repeatedly.
playlist repeatedly.
genre repeatedly.
album in random order.
artist in random order.
playlist in random order.
genre in random order.
device in random order.
OFF"

Bluetooth function

Bluetooth operations

To use the Bluetooth function, the following
procedure is necessary.

1 Pairing

When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called "pairing." This registration (pairing)
is required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time. You
can pair up to 9 devices. (Depending on the
device, you may need to input a passcode for
each connection.)
2 Connection
To use the device after pairing is made, start
the connection. Sometimes pairing allows to
connect automatically.
3 Handsfree calling/Music streaming
You can talk handsfree and listen to music
when the connection is made.
Pairing
First, register ("pair") a Bluetooth device
(cellular phone, etc.) and this unit with each
other. You can pair up to 9 devices. Once pairing
is established, there is no need for pairing again.
1
Place the Bluetooth device within 1 m
(3 ft) of this unit.
2
Press and hold (BT) until "
(about 5 seconds).
The unit enters pairing standby mode.
3
Set the Bluetooth device to search for
this unit.
A list of detected devices appears in the
display of the device to be connected. This
unit is displayed as "XPLOD" on the device
to be connected.
DR-BT30Q
XPLOD
XXXXXXX
continue to next page t
" flashes
flashing
15