Error displays (when an optional CD/MD unit is connected)
The following indications will flash for about 5 seconds, and an alarm sound will be heard.
When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear
in the display.
The disc number of the disc causing the error appears in the display.
If the above-mentioned solutions do not help improve the situation, consult your nearest Sony
The disc magazine is not inserted in
the CD/MD unit.
No disc is inserted in the CD/MD unit.
A CD is dirty or inserted upside
An MD does not play because of some
A CD/MD cannot play because of
No tracks have been recorded on an
The CD/MD unit cannot be operated
because of some problem.
The lid of the MD unit is open or MDs
are not inserted properly.
The ambient temperature is more than
Insert the disc magazine in the CD/
Insert discs in the CD/MD unit.
Clean or insert the CD correctly.
Insert another MD.
Insert another CD/MD.
Play an MD with tracks recorded on
Press the RESET button of the unit.
Close the lid or insert the MDs
Wait until the temperature goes
down below 50°C (122°F).