Operating this unit
You can control this unit by a Sony Master
Some master units have (+)/(–) (volume)
buttons, and some have a dial.
This instructions shows as follow.
Rotate/press (+) or (–).
There may be a difference between the display items of this
manual and the master unit.
Note in operation
•The unit has a digital volume control system.
Do not down the volume of the master unit
too much as doing so may cause the sound
quality to deteriorate.
•When you connect this unit to the master
unit, the loudness function will not work.
•The sound becomes unclear in some
situations (such as when the BAS, TRE or EQ
are excessively boosted).
•Two units can not be used at same time.
About operation mode
This unit has three operation modes.
Sound Control Mode
Select the item or adjust it partially.
•EQ (Graphic Equalizer): Select the equalizer
•POS (Listening Position): Select the listening
•SUB (Subwoofer): Adjust the subwoofer
Sound control mode can adjust not only BAS,
TRE, BAL, FAD but also VOL. For further
details, read the master unit instructions.
Sound Tuning Mode
Tune in the item selected in the Sound Control
•EQ (Graphic Equalizer): Setting and
registering the equalizer curve.
•POS (Listening Position): Adjust the
•CNW (Cross Over Network): Adjust the cut-
Name Edit Mode
EQ (Graphic Equalizer): Naming the equalizer