RUGGEDCOM RS900GF
Installation Guide
Available Ports
1
Figure 12: SC Connector
1. Tx Connector 2. Rx Connector
LEDs
Each port features an LED that indicates its link/activity state.
Figure 14: LED for Fiber Optic Ethernet Ports
1. Link/Activity LED
Specifications
For further specifications, refer to
Section 3.3
SFP Transceivers
The RUGGEDCOM RS900GF supports up to two Small Form-Factor Pluggable (SFP) transceiver sockets, which are
compatible with a wide array of SFP transceivers available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
State
Green (Solid)
Green (Blinking)
Off
SFP Transceivers
1
1
Section 4.4, "Fiber Optic Ethernet Port
2
Figure 13: LC Connector
1. Tx Connector 2. Rx Connector
State
Green (Solid)
Green (Blinking)
Off
Description
Link established
Activity
No link detected
Communication Ports
1
Description
Link established
Link activity
No link detected
Specifications".
Chapter 3
2
17