Advertisement
STACKING KIT INSTALLATION INSTRUCTIONS
Washer
Step8 : Assemble the Rear Brackets to the washer as
shown above. Use two(2) Screws-Hex
Head(34001382) with washers in each washing machine
top cover tang if there are two holes.
Use one(1) Screw-Hex Head(34001382) with washer in
each top cover tang if there is one hole.
STOP HERE
Step 9: Lift and position dryer into the position on the washer shown.
Step10 : Assemble the Rear Brackets to the dryer as shown
above. Note that four screws must be used to hold the Rear
Brackets to the back of the dryer. Use four(4) Screws-phillips Pan
Head(6006-001174) in the back of the dryer cabinet.Extra screws
are included in the kit for this.
STACKING KIT COMPONENTS:
Stacking Support Guides(2)
-34001449
Rear Bracket(2)
-34001463
Screws-Hex Head(4)
-34001382
(MAH6700 washer & MDE6700 dryer only)
Step 11: Stacked Unit is now ready to be installed. Refer to
detailed installa-
tion instructions packed with products.
Screws Phillips-Pan Head(8) -6006-001174
Washer(4)
Rear Bracket
Screw-Hex Head
Screw Phillips-Pan Head
Stacking Support Guide
Washer
Advertisement
