Operation; Maintenance And Service - Bosch GLI 18V-300 Original Instructions Manual

OBJ_BUCH-3364-001.book Page 9 Thursday, September 7, 2017 10:58 AM
English | 9
Observe the notes for disposal.

Operation

Initial Operation
Inserting the battery
Insert the charged battery 1 into the battery port until it can be felt to engage and is
seated flush.
Switching On and Off
To start the cordless worklight, press the On/Off switch 4.
To switch off the cordless worklight, press the On/Off switch 4 again.
To save energy, only switch the cordless worklight on when using it.
Working Advice
Utility Hook (see figure A)
You can use the utility hook 5 to attach the cordless worklight to an object.
Swivelling the Lamp Head (see figure B)
The lamp head 3 can be swivelled in XX stages to suit the application.
Possible applications include:
– Lighting a room
– Lighting a workplace with no glare
– Lighting a floor

Maintenance and Service

Maintenance and Cleaning
When the battery is no longer operative, please refer to an authorised after-sales ser-
vice agent for Bosch power tools.
The cordless worklight is maintenance-free and contains no components that must be
replaced or maintained.
The light source cannot be replaced. If the light source is defective, the entire cord-
less worklight has to be replaced.
To avoid damage, clean the plastic lens of the cordless worklight only with a dry, soft
cloth. Do not use cleaning agents or solvent.
Bosch Power Tools 1 609 92A 459 | (7.9.17)