WWW.ERTEBATGROUP.COM
Assigning the BRI Setting (Automatic Configuration)
1.
a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the BRI card.
A menu will be shown under the mouse pointer.
c.
Click Ous to set the card to out-of-service status.
Click Tool ® BRI Automatic Configuration from the
2.
menu bar.
3.
a.
Click Check to turn on the BRI card.
b.
Click OK.
4.
a.
Enter the subscriber number for the desired ports in
Subscriber.
b.
Click Execute.
Note
c.
Click Check Box of the desired ports.
d.
Click Data Apply.
e.
Click Close.
5.
a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the BRI card, then click
INS to set the card to in-service status.
WWW.ERTEBATGROUP.COM
Network settings are automatically set.
Getting Started for Physical Cards
4.1 Programming the PBX
25