Preparing The Battery Pack - Sony MHS-PM1 Instruction Manual

1 Preparing the battery pack

For customers in the USA and
Canada
CHARGE lamp
1
Insert the battery pack into the battery charger.
• Insert the battery pack as far as it will go, then press the back of the battery pack gently until it clicks.
2
Connect the battery charger to the wall outlet (wall socket).
The CHARGE lamp lights up, and charging starts.
When the CHARGE lamp turns off, charging is finished (Normal charge). Also, the CHARGE lamp
may turn off when the temperature is outside of the recommended operating temperature (10 to 30°C),
as the charger is on standby.
[ Charging time
Full charge time
Approx. 300 min.
• Time required to charge a fully depleted battery at a temperature of 25°C (77°F). Charging may take
longer under certain circumstances or conditions.
• See page 31 for the number of images that can be recorded.
For customers other than those in the USA and
Canada
Plug
2
1
1
CHARGE lamp
Power cord (mains lead)
2
11