Honeywell Thor VM1 Quick Start Manual page 3

Field replaceable front panel

10. Position the replacement front panel so the tab on the back of the front panel lines up with the slot on the Thor VM1/Thor VM1A. Be

sure the two wiring connectors are also aligned.

Slot

Thor VM1/Thor VM1A with Front Panel Removed

11. Gently press the front panel into place.

12. Tighten the fourteen (14) captive M3 screws in the order shown in the figure for step 8 above. Use a #2 Phillips bit and torque the

screws to 6-7 inch pounds.

13. Reinstall the computer in the dock. When the computer is placed in the powered dock, the UPS battery automatically reconnects.

14. Press the Power button on the front.

15. The keyboard configuration is automatically recognized.

16. If the Thor VM1 has a Windows CE operating system and the defroster configuration has changed, use the Test button on the

Peripherals control panel to update the Thor VM1's configuration. Select Start > Settings > Control Panel > Peripherals and tap

the Test button.

17. The computer is ready for use.

164007-0001 Rev D 1/19

Wiring Connector

Back of Thor VM1/Thor VM1A Front Panel

Tab

Page 3

Thor vm1a