Statistical Data Input; Editing Statistical Sample Data - Canon F-789SGA Instruction Manual

Statistical Data Input

After confirmed the calculation type in the Statistical Type
Selection screen or by pressing
mode, the following Statistical Data Input screen will be shown.
1-variable STAT
• After turning on Data Frequency in the setup menu, the
"FREQ" column will be added into the above screen.
• The following are the maximum number of lines for data input.
Statistic type
Single Variable (only x input)
2 Variable (x & y input)
• Input expression and display result values in the Statistical
Data Input screen are in Line mode (same as Comp mode
with Line mode status).
• After inputted the data, press
statistical registers and display the value (max. 6 digits) in the
cell. You can press cursor key to move the cursor between
each cell.

Editing Statistical Sample Data

Replacing the Data in a Cell
(1) In the Statistical Data Input screen, move the cursor to
the cell you want to edit.
(2) Input the new data value or expression, and press
Deleting a Line
(1) In the Statistical Data Input screen, move the cursor to
the line you want to delete.
(2) Press
Inserting a Line
(1) In the Statistical Data Input screen, move the cursor to
the line that will be under the line being inserted.
(2) Press
(3) Press
Deleting All STAT Data Input
(1) Press
(2) Press
2-variable STAT
Apps
(Edit)
(Ins)
Apps
(Edit)
(Del-A)
Apps
(Data) in the STAT
FREQ ON
40
26
to store the value into
23
1-variable STAT
"FREQ ON"
FREQ OFF
80
40
.