About The "Infolithium" Battery Pack - Sony HANDYCAM HDR-CX100 User Manual

About the "InfoLITHIUM" battery
pack
Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
"InfoLITHIUM" H series battery packs
have the mark.
What is an "InfoLITHIUM" battery pack?
An "InfoLITHIUM" battery pack is a

lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your camcorder
and an AC Adaptor/charger (sold separately).
The "InfoLITHIUM" battery pack calculates the

power consumption according to the operating
conditions of your camcorder, and displays the
remaining battery time in minutes.
The battery pack NP-FH50 is compatible with

"ActiFORCE. " "ActiFORCE" is a new generation
power system. Battery capacity, boost charge,
and the speed and accuracy of battery time
remaining calculations have been improved
when compared with current "InfoLITHIUM"
P-series batteries.
To charge the battery pack
Be sure to charge the battery pack before you

start using your camcorder.
We recommend charging the battery pack in an

ambient temperature of between 10
(50 ˚F to 86 ˚F) until the CHG (charge) lamp
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it efficiently.
To use the battery pack effectively
Battery pack performance decreases when the

ambient temperature is 10
and the length of time you can use the battery
pack becomes shorter. In that case, do one
of the following to use the battery pack for a
longer time.
Put the battery pack in a pocket to warm it

up, and install it on your camcorder right
before you start taking shots.
Use a large capacity battery pack: NP-FH70/

FH100 (sold separately).
Frequent use of the LCD screen or a frequent

playback, fast forward or reverse operation
C to 30 C
 
C (50 °F) or below,

10
wears out the battery pack faster. We
recommend using a large capacity battery pack:
NP-FH70/FH100 (sold separately).
Be sure to close the LCD screen when not

recording or playing back on your camcorder.
The battery pack is also consumed when your
camcorder is in recording standby or playback
pause.
Have spare battery packs ready for 2 or 3 times

the expected recording time, and make trial
recordings before making the actual recording.
Do not expose the battery pack to water. The

battery pack is not water resistant.
About the remaining battery time
indicator
When the power goes off even though the

remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for
a long time, or if left in a fully charged state,
or when the battery pack is frequently used.
Use the remaining battery time indication as a
rough guide only.
The  mark that indicates low battery flashes

even if there are still 20 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
If the battery pack is not used for a long time,

fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
To discharge the battery pack on your

camcorder completely, touch
(SETTINGS)  [GENERAL SET] 
[A.SHUT OFF]  [NEVER], and leave your
camcorder in recording standby until the power
goes off (p. 81).
About battery life
Battery capacity decreases over time and

through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
(HOME) 