Names Of Parts (See Fold-Out Page); Technical Data; Safety Information - Silvercrest SKD 2300 A1 Operating Instructions Manual

RP90866 Konvektor LB3 Seite 4 Dienstag, 9. Juli 2013 12:52 12
1 Rest for remote control
2 Control panel
3 Warning symbol - "Do not cover"
4 Air outlet
5 Display
6 Air inlet
7 Feet
8 Temperature sensor
9 Mains switch
10 Handle
11 Selected heating level display
12 "Fan" symbol
13 "Frost protection" symbol
Power supply:
Maximum power:
Protection class:
Batteries for remote control: 2x type AAA/LR03 1.5 V
Ambient conditions:
4.1 Terms used
The following signalling terms are found in
these Operating Instructions:
Warning!
High risk.
warning may cause injury to life
and limb.
Caution!
Medium risk. Disregarding the warning may
cause damage to property.
4
2. Names of parts
14 Selected unit of measurement display
15 Fan button
16 Increase temperature
17 Reduce temperature
18 Timer button
19 Running time display
20 Set temperature display
21 Measured temperature display
22 On/Off button
23 Infrared receiver for remote control
24 Button for selecting unit of measurement
25 Button for selecting the heat setting

3. Technical data

220 - 240 V /50 Hz
~
2,300 watts
I
0 °C to +25 °C, max. 85 % relative humidity

4. Safety information

Note:
Low risk. Circumstances that should be taken
into account when dealing with this
appliance.
4.2 General information
Disregarding the
• Before using the appliance, be sure to
(see fold-out page)
read these Operating
carefully. They are a component part of
the appliance and must be available at
all times.
Instructions