Searching For The Starting Point; Searching For The Last Scene Of The Most Recent Recording (End Search); Searching Manually (Edit Search); Reviewing The Most Recently Recorded Scenes (Rec Review) - Sony Handycam DCRHC38 Operating Manual

Searching for the starting point

Make sure that the CAMERA lamp
lights up (p. 19).
Searching for the last scene of
the most recent recording
(END SEARCH)
[END SCH] (END SEARCH) will not
work once you eject the cassette after you
have recorded on the tape.
Touch
[END SCH].
60min
PAGE1
SPOT
FOCUS
MENU SCENE
Touch here again to cancel the operation.
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
b Notes
• [END SCH] will not work correctly when there
is a blank section between recorded sections on
the tape.
z Tips
• This operation is also available when the
POWER switch is set to PLAY/EDIT.
Searching manually
(EDIT SEARCH)
You can search for the start point to start
the next recording while viewing the
pictures on the screen. The sound is not
played back during the search.
24
t [PAGE1], then touch
0:00:00
PAGE2
FOCUS SPOT DISP
METER GUIDE
END EXPO–
SEL. SCH SURE
1
Touch t [PAGE1] t
[MENU].
2
Select (CAMERA SET) with
/ , then touch [EXEC].
3
Select [EDITSEARCH] with
, then touch [EXEC].
4
Select [ON] with
then touch [EXEC] t
60min
EDIT
5
Touch and hold
backward)/
and release it at the point where
you want the recording to start.
Reviewing the most recently
recorded scenes (Rec review)
You can view a few seconds of the scene
recorded just before you stopped the tape.
1
t [PAGE1] t
Touch
[MENU].
2
Select (CAMERA SET) with
/ , then touch [EXEC].
/ ,
.
STBY 0:00:00
GUIDE FN
(to go
(to go forward)
/