Using Audio And Video Equipment - Sony BRAVIA KDL-40R370C Operating Instructions Manual

Using Audio and Video
Equipment
1
Turn on the connected equipment.
2
Press INPUT to display the input
source.
3  
Press / then
desired input source.
The highlighted item is selected if 5
seconds pass without any operation.
Note
• When connecting a digital audio system not
compatible with Audio Return Channel (ARC)
technology using an HDMI cable, you need to
connect an optical audio cable to the DIGITAL
AUDIO OUT (OPTICAL) to output digital sound.
• When connecting with an HDMI cable, be sure to
use HighSpeed HDMI Cable with Cable Type Logo
(Recommended SONY Cable).
• When connecting mono equipment, connect the
audio cable to the L (mono) jack.
To use BRAVIA Sync devices
When connecting the TV to BRAVIA Sync
compatible equipment, you can control
them together.
Be sure to perform the necessary settings in
advance. The BRAVIA Sync Control settings
must be set on both the TV and the
connected equipment. See [BRAVIA Sync
Settings] (page 23) for the settings on the
TV side. Refer to the connected equipment
operating instructions for the settings on
the connected equipment side.
to select the
US
31
US