Changing The Language Setting - Sony Handycam DCR-SR65 Handbook

Digital video camera recorder
Hide thumbs Also See for Handycam DCR-SR65:
Table of Contents

Advertisement

To turn off the power
Turn the POWER switch to OFF (CHG).
Notes
If you do not use your camcorder for about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the built-in rechargeable battery and
then set the date and time again (p. 94).
It takes a few seconds for your camcorder to
be ready to shoot after the power is turned on.
You cannot operate your camcorder during this
time.
In the default setting, the power turns off
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to
save battery power ([A.SHUT OFF], p. 67).
Tips
The date and time do not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 62).
Refer to page 88 for information concerning
"World time difference."
If the buttons on the touch panel do not
work correctly, adjust the touch panel
[CALIBRATION] (p. 93).

Changing the language setting

You can change the on-screen displays to
show messages in a specified language.
(HOME) 
Touch
LANG]  [
[CLOCK/
SET], then select the desired language.
18
(SETTINGS) 
LANGUAGE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Handycam dcr-sr46Handycam dcr-sr85Dcr-sr45Handycam dcr-sr45Handycam dcr-sr46Handycam dcr-sr85

Table of Contents