Getting Started; Step 1: Charging The Battery Pack - Sony HANDYCAM CX360V Operating Manual

Getting started

Step 1: Charging the battery pack

Battery pack
CHG (charge) lamp
/CHG (flash/charge) lamp
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.

Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.

1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The CHG (charge) lamp or the /CHG (flash/charge) lamp lights up and charging starts.
The CHG (charge) lamp or the /CHG (flash/charge) lamp turns off when the battery
pack is fully charged.
US
1
Align the  mark on the DC plug
with that on the DC IN jack.
DC IN jack
AC Adaptor
To the wall outlet
DC plug
Power cord
(Mains lead)
(wall socket)