Lcd Screen - Sony Handycam 3-288-519-13(1) Getting Started Manual

– [FLASH MODE]
– [ INDEX SET]
– [ IMAGE SIZE]
– [FILE NO.]
– [ DISPLAY]
– [VOLUME]
– [BEEP]
– [TV TYPE]
– [COMPONENT]
– [CLOCK SET]
– [AREA SET]
– [SUMMERTIME]
– [ LANGUAGE SET]
– [DEMO MODE]
– [CTRL FOR HDMI]
Your camcorder gets warm.
• This is because the power has been turned
on for a long time. This is not a
malfunction.
Batteries/Power sources
The power abruptly turns off.
• When approximately 5 minutes have
elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the
setting of [A.SHUT OFF] (p. 71), or turn
on the power again, or use the AC Adaptor.
• When the time selected in [QUICK ON
STBY] has elapsed during sleep mode, the
camcorder is automatically turned off
(p. 71). Turn on the power again.
• Charge the battery pack (p. 15).
The /CHG (charge) lamp does not
light while the battery pack is being
charged.
• Turn off your camcorder (p. 15).
• Insert the battery pack into the camcorder
correctly (p. 15).
• Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
• The battery charge is completed (p. 15).
• Set the camcorder onto the Handycam
Station securely (p. 15).
80
The /CHG (charge) lamp flashes
while the battery pack is being
charged.
• Insert the battery pack into the camcorder
correctly (p. 15). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
• The ambient temperature is too high or too
low. This is not a malfunction.
• The battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p. 15).
• The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly
discharged.
• The ambient temperature is too high or low.
This is not a malfunction.
• Fully charge the battery again. If the
problem persists, replace the battery pack
with a new one (p. 15).

LCD screen

Menu items are grayed out.
• You cannot select grayed items in the
current recording/playback situation.
• There are some functions you cannot
activate simultaneously (p. 84).
The buttons do not appear on the
touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO (p. 18).