Location And Functions Of Parts And Controls; Front Panel/Top Panel; Rear Panel - Sony ExwaveHAD DXC-990 Instructions For Use Manual

Location and
Functions of Parts
and Controls

Front Panel/Top Panel

1
2
3
4

Rear Panel

5
MENU
TRIG IN
FILE
SELECT
RGB/SYNC
6
7
VIDEO OUT
DC IN/
VBS
8
9
0
qa
qs
qd
qf
qg
BLACK
BARS
WHITE
qh
ENTER
qj
LENS MENU LOCK
qk
ON
OFF
GEN LOCK ql
REMOTE

Location and Functions of Parts and Controls

1 Boss
Attach the supplied lens mount stopper
to prevent the lens from getting loose.
2 Lens Mount
Attach a zoom lens or microscope
adaptor.
3 Mount lever
Fasten the lens by turning the mount
lever clockwise after attaching the lens.
4 Installation/tripod holes (top
and bottom panels)
Use these holes when attaching the
camera to a wall or ceiling, or a tripod.
1
(screw: / , UNC20)
4
5 TRIG IN connector (BNC type)
Connects to a commercially available
slave unit by converting to BNC type in
strobe mode.
6 RGB/SYNC
sub 9-pin)
Outputs RGB signals and their
respective sync signals.
Use the CCXC-9DB/CCXC-9DD/
CCMC-9DS connecting cable for the
connection with the CMA-D2/D2MD/
D2CE/D2MDCE camera adaptor.
For connection with the CMA-D3/
D3CE camera adaptor, use the CCMC-
3MZ connecting cable.
7 LENS connector (6-pin)
Connects to a lens cable when attaching
the 2/3-inch zoom lens. This connector
is not used for the 1/2-inch zoom lenses.
8 VIDEO OUT
(BNC type)
Outputs a composite video signal.
DC IN/VBS
9
video signal output) connector
(12-pin)
Connects to the CMA-D2/D2MD/
D2CE/D2MDCE/D3/D3CE camera
adaptor. Inputs the DC power and
outputs the VBS signal.
connector (D-
connector
(DC input/
7 GB