T4360G, T6360D,E Line Voltage Thermostat
The thermostat sensing element comprises two circular,
flexible metal plates welded together at the rims
encapsulating a liquid whose pressure changes greatly
in response to small variations in temperature. In effect,
this dual diaphragm forms a 'bellows' which
expands/contracts in sympathy with the ambient
temperature changes – this movement serving to
operate a snap acting switch rated to control the heating
or cooling circuit.
The On/Off switch provides a means of manually
isolating the mains input to the thermostat to provide a
positive off feature.
The Heat/Off/Cool switch provides a means of selecting
the thermostat to heat or to Cool and also to provide a
positive off. When the switch is selected in the heat
position the thermostat will activate on a temperature
fall, when the switch is selected to cool, the thermostat
will activate on a temperature rise.
The fan switches provide a means to control the system
fan. The Cont/Auto switch allows continuous or auto
control of the fan. When the switch is selected to Auto
the fan operates with the equipment. The Lo/Med/Hi fan
switch allows three fan speeds to be selected.
All models have an indicator lamp. On T4360G the lamp
indicates that the heating equipment is being switched
The lamp on the T6360D indicates that the cooling
equipment is being switched by the thermostat. On the
T6360E models the lamp indicates when the compressor
is being switched on.
Only covers dial, not switches