Shooting Settings - Shooting Settings 2; Auto Orientation; Auto Review - Sony DSC-H10 Cyber-shot&reg Handbook

Settings
Shooting Settings — Shooting Settings 2
The default settings are marked with

Auto Orientation

When the camera is rotated to shoot a portrait (vertical) image, the camera records its position
change and displays the image in the portrait position.
On
Off
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
correctly. If an image is not recorded in the correct orientation, you can rotate the image, following the
procedure on page 60.
• Black is displayed to the left and right of vertical orientation images.

Auto Review

Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
On
Off
• If you press the shutter button halfway down, the recorded image display disappears and you can
immediately shoot the next image.
For details on the operation 1 page 61
.
Records the image with the correct orientation.
Does not use Auto Orientation.
Uses the Auto Review.
Does not use Auto Review.
73