Switching On And Off - Miele CVA 6805 Operating And Installation Instructions

Switching on and off

Switching on
When the coffee machine is switched
on, it heats up and rinses the pipework.
This not only cleans the pipework, but
also warms it before coffee is prepared.
If the coffee machine is already at
operating temperature, the pipework
will not be rinsed when the machine is
switched on.
 Touch the On/Off sensor .
The machine will begin rinsing after the
heating-up phase. Hot water will come
out of the central spout.
You can now make drinks.
Tip: If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container (e.g. the
small cleaning container) underneath
the central spout before making the first
coffee of the day.
30
Switching the coffee machine
off
 Touch the On/Off sensor .
If coffee has been dispensed, the coffee
machine will rinse the coffee pipework
automatically before switching off.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time:
 Empty the drip tray, the waste
container and the water container.
 Clean all components thoroughly,
including the brew unit, the central
spout connector and the drip catcher
in the machine front.
 Switch off the machine.
If you are leaving the front open
while the coffee machine is not being
used for a long time, disconnect it
from the mains electricity supply to
save energy.