Toshiba B-SX600 Series Command Manual page 24

• The "left end" and "right end" indicated by the CL and CR bits are the positions as viewed from the
printer back side.
Bit Value
1
FC
0
1
SC
0
1
HU
0
1
HL
0
1
CO
0
1
CL
0
1
CR
0
1
PN
0
1
PL
0
1
RE
0
1
PE
0
• When 8 th th
to 11 bytes (counted from "0") read from the printer are "/RSB", this is judged as a response
to the request.
NOTE:
When the opened cover is closed, this possibly means a replacement of the paper or ribbon has been done.
When the host detects a cover close, it is desired that the printer feeds the paper to the home position.
The front cover is opened.
The front cover is closed.
The side cover is opened.
The side cover is closed.
The print head unit is opened.
The print head unit is closed.
The print head unit is unlocked.
The print head unit is locked.
Any of the FC, SC, HU, and HL is opened.
All of the FC, SC, HU, and HL are closed.
The disc cutter is positioned at the left end, as viewed from the printer back.
The disc cutter is not positioned at the left end, as viewed from the printer back.
The disc cutter is positioned at the right end, as viewed from the printer back.
The disc cutter is not positioned at the right end, as viewed from the printer back.
Paper near end
Sufficient paper
Printed label has been removed.
Printed label has not been removed.
No ribbon
Ribbon has been loaded.
Media end
Media has been loaded.
Operation
- 21 -
B-SX600 Command Manual