Special effects on images or additional
functions on recording/playback
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 44 for details on selecting
You can add the following effects to currently
1 During standby (fade in) or recording (fade
out), select the desired effect, then touch
When you select [OVERLAP] or [WIPE], the
image is stored as a still image. (While storing
the image, the screen turns to blue.)
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the current setting before your
operation, touch [OFF] in step 1. Once you
press START/STOP, the setting is cancelled.
OVERLAP (fade in only)
WIPE (fade in only)
D.EFFECT (Digital effect)
You can add digital effects to your
1 Touch the desired effect.
2 When you select [LUMI. KEY], adjust the
The image displayed when you touch
is saved as a still image.
To cancel [D.EFFECT], touch [OFF] in step
LUMI. KEY (luminance key)
Replaces a brighter area in a previously
recorded still image (e.g. a person) with a
Adds an sepia colored effect to movies.
• The aspect ratio cannot be changed to 16:9 (wide)
when [OLD MOVIE] is selected.
PICT.EFFECT (Picture effect)
You can add special effects to a picture during
Does not use [PICT.EFFECT] setting.
Picture appears in sepia.
Picture appears in black and white.
Picture appears like a pale pastel drawing.
, then touch