Step 2: Charging the battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) after attaching
it to your camcorder.
• Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
Attach the battery pack by sliding
it in the direction of the arrow until
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(The default setting).
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the v mark on the DC plug
is facing up.
Connect the power cord to the AC
Adaptor and the wall outlet.
DC IN jack
Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged. Remove the camcorder from the
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Still) lamp (p.13) is turned off.