Oven Controls; Oven Safety Features; System Lock; Sensor Lock For The Oven - Miele H6800BMX Operating And Installation Instructions

Features

Oven controls

The oven controls are used to operate
the various cooking functions for
baking, roasting, grilling and heating.
They are also used for:
– Time of day display
– Minute minder
– Switching cooking processes on and
off automatically
– Automatic programmes
– the creation of User programmes,
– Settings that can be customised

Oven safety features

System lock 
The system lock prevents the oven from
being used unintentionally (see
"Settings - System lock").
The system lock will remain activated
even after an interruption to the power
supply.

Sensor lock for the oven

The sensor lock prevents the oven
being switched off by accident or
settings being altered whilst food is
cooking. Once activated, the sensor
lock deactivates the sensors and fields
in the display a few seconds after a
programme has been started (see
"Settings – Safety – Sensor lock").
32

Cooling fan

The cooling fan comes on automatically
when a cooking programme is started.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
The cooling fan will switch itself off
automatically after a certain period of
time (see "Settings – Cooling fan run
on").

Safety switch-off

A function without microwave can be
started without selecting a cooking
duration. To prevent overuse and the
consequent danger of fire, the oven will
switch itself off automatically after a
certain length of time. This can be
between 1 hour and 12 hours
depending on the function and
temperature chosen.
If a Microwave combination
programme is followed in quick
succession by another programme
using microwave power, the magnetron
(which produces the microwaves)
cannot be switched on again until
approx. 10 seconds have elapsed.
Therefore, wait a short while before
starting the second process.