Table of Contents
Advertisement
Operation
Using the appliance
This SmartLine element is equipped
with electronic sensor controls which
react to finger contact. For safety reas-
ons, in order to switch the appliance on,
the On/Off sensor needs to be
touched for a little longer than the other
sensors.
Each time you touch a sensor, an aud-
ible tone sounds.
Only the printed On/Off symbol is
visible when the SmartLine element is
switched off. The other sensor controls
light up when the SmartLine element is
switched on.
Malfunction due to dirty and/or
covered sensor controls.
If the sensor controls are dirty or
covered this could cause them to fail
to react, to activate a function or
even to switch the appliance off
automatically (see "Safety features",
"Safety switch-off"). Placing hot
pans on the sensor controls/indicat-
ors can damage the electronic unit
underneath.
Keep the sensor controls and indic-
ators clean and do not place any-
thing on top of them. Do not place
hot pans on them.
20
The Tepan Yaki has two cooking zones
which can be switched on and regu-
lated independently of one another. The
entire area can be used when cooking
food or keeping large quantities of food
warm. For smaller quantities, the rear
zone can be used for cooking food
whilst the front can be used for keeping
food warm with the keeping warm func-
tion .
Advertisement
Table of Contents
