Description of Safety Integrated functions
Safety Integrated Basic Functions and Safety Integrated Extended Functions are described
in detail in the "SINAMICS S120 Safety Integrated Function Manual".
The "SINAMICS S120 Safety Integrated Function Manual" is available on the Internet at the
following address (https://support.industry.siemens.com/cs/ww/en/ps/13231/man).
4.1
Preconditions for Safety Integrated Basic Functions
The following prerequisites apply for operation of the Safety Integrated Basic Functions:
● For G150, S120 Cabinet Modules and S150:
Option K82 (Terminal Module for activation of the safety functions "Safe Torque Off" and
"Safe Stop 1"), for activation signals of 230 V and/or cable lengths of more than 30 m
● An activated current controller in the drive
● For the safe brake control:
– For G150, S120 Cabinet Modules and S150:
– For the G130 and S120 Chassis units:
Safety Integrated
Function Manual, 07/2016, A5E03264275A
Option K88 (Safe Brake Adapter 230 VAC)
Option SBA (Safe Brake Adapter)
4
31