Ecomax® For Indirect Heating Systems - Honeywell Ecomax Series Technical Information

Application
1 .5 ECOMAX® for indirect heating systems
For indirect heating, various radiant tubes are used.
Single ended radiant tube
Indirect heating with the ECOMAX burner can be
carried out using a metallic radiant tube SER-M or a
ceramic radiant tube SER-C. A flame tube made of
SICAFLEX elements is fitted inside the radiant tube to
guide the flue gases. The flue gases are discharged via
a flue gas connector FLUP.
The high outlet velocity of the flame causes a recircula-
tion of the flue gases and thus:
– a reduction in NO emissions,
X
– a uniform radiant tube temperature.
FLUP
ECOMAX..M
FLUP
ECOMAX..C
ECOMAX · Edition 10.17
SER-M
SICAFLEX
SER-C
SICAFLEX
P and twin P radiant tube
P and twin P radiant tubes are used in some processes,
for example in heat treatment systems for steel strip as
an alternative to U or W radiant tubes. The new burner
version ECOMAX..P with a special recuperator head is
for use in P radiant tubes.
Flue gas
Gas Cold air
Flue gas
Gas Cold air
P radiant tube
Twin P
radiant tube
9