Setting Holiday Override; Initiating Occupancy Mode; Remote Setback: Commercial Use - Honeywell THX9321 Prestige 2.0 Product Data

®
THX9321 PRESTIGE 2.0 AND THX9421 PRESTIGE
4. Touch  or  to select the Heat and Cool temperatures.
5. Review the settings and touch Done to save them. Touch
Back, then Cancel to ignore the changes.

Setting holiday override:

commercial use
This feature lets you customize temperature settings to be
maintained from now until a specified date. The thermostat
resumes normal scheduling on the date you select.
1. Touch MENU.
2. Select Holiday Mode to display temperatures while you
are away on holiday.
Holiday Mode
3. Touch  or  to select the Heat and Cool temperatures,
then touch Next to select return date.
68-0311—02
Fig. 105.
MENU
Fig. 106.
Fig. 107.
Fig. 108.
®
IAQ WITH EIM
4. Review the settings and touch Done to save them. Touch
Back, then Cancel to ignore the changes.
NOTE: The cool temperature can only be set higher than
the unoccupied program setting and the heat tem-
perature can only be set lower than the unoccu-
pied program setting.

Initiating occupancy mode:

commercial use
This feature keeps temperature at an energy-saving level until
you touch Press to start occupancy. When you arrive, touch the
button to maintain a comfortable temperature while the room is
occupied.
Touch the  or  buttons to set the temperature or the Hold
Until time. The temperature is maintained until the time you set.
Temperature returns to an energysaving level after the timer
expires, or the "Occupied" period ends.
NOTE: This feature is available only when programmed
by the installer.

Remote setback: commercial use

During Occupied program periods, an occupancy sensor
directs the thermostat to go to REMOTE SETBACK settings
when the room is empty. If someone is in the room, it uses the
Occupied program period settings. The thermostat ignores the
occupancy sensor during Unoccupied program periods.
If the thermostat is set up to be non-programmable, the sensor
directs the thermostat to go to REMOTE SETBACK settings
when the room is empty. If someone is in the room, then it
follows the settings set by the user.
78
Done
Fig. 109.
Press to start
occupancy
Fig. 110.