Honeywell THX9321 Prestige 2.0 Product Data page 53

ISU Installer Setup
Number Name
6160 Fan Failure Alert
Dry Contact Setup
6170 What Terminals are
Wired to the
Custom Alert Dry
Contact?
6180 Custom Alert Dry
Contact Setup
6190 Custom Alert Name
6200 Custom Alert
Message
7000 Filter Type
7020 Number of Air
Filters
Table 4. Installer Setup (ISU) Table. (Continued)
Settings
Normally Open when Fan is
Running
Normally Closed when Fan is
Running
None
S1
S2
S3
S4
Normally Open
Normally Closed
View/Edit Custom Alert
View/Edit Custom Alert
None
Electronic Air Cleaner
Media
1 to 2
®
THX9321 PRESTIGE 2.0 AND THX9421 PRESTIGE
Residential,
Commercial
Default or Both
Normally Both
Closed when
Fan is Running
None Both
Normally Open Both
View/Edit Both
Custom Alert
View/Edit Both
Custom Alert
Media Both
1 Both
53
Requires
EIM Notes
Yes Dry Contact Alerts require an EIM
(Equipment Interface Module).
Choose an option appropriate for the type
of device installed:
Normally Open when Fan is Running: The
Dry Contact device is open when the fan is
running and will close when the fan is not
running.
Normally Closed when Fan is Running: The
Dry Contact device is closed when the fan
is running and will open when the fan is not
running.
Yes Dry Contact Alerts require an EIM
(Equipment Interface Module).
Yes Dry Contact Alerts require an EIM
(Equipment Interface Module).
Choose an option appropriate for the type
of device installed:
Normally Open: The Dry Contact device is
normally open and will close when the
device is activated.
Normally Closed: The Dry Contact device is
normally closed and will open when the
device is activated.
Yes Dry Contact Alerts require an EIM
(Equipment Interface Module).
Enter a name for the custom alert dry
contact. The thermostat displays this name
including a brief message (entered on the
next screen - ISU 6200) when a dry contact
device detects a problem.
Yes Dry Contact Alerts require an EIM
(Equipment Interface Module).
Enter a message for the custom alert dry
contact. The thermostat displays this
message when a dry contact device detects
a problem.
No
No
®
IAQ WITH EIM
68-0311—02