Editing Onto Another Tape - Sony CCD-TRV19 Operation Manual (primary manual) Operation Manual

Editing onto another tape

You can create your own video program by editing with any other h 8 mm, H Hi8,
j VHS, k S-VHS,
VCR that has video/audio inputs.
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
After connecting the camcorder to the VCR,
(1) Set the POWER switch to PLAYER.
(2) Insert a blank tape (or a tape you want to record over) into the VCR and insert
your recorded tape into the camcorder.
(3) Play back the recorded tape on the camcorder until you locate the point where
you want to start editing, then press P to put the camcorder in playback pause
mode.
(4) On the VCR, locate the recording start point and put the VCR in recording
pause mode.
(5) Press P on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 3 to 5.
To stop editing
Press p on both the camcorder and VCR.
30
VHSC, K S-VHSC, l Betamax or ¬ ED Betamax
CCD-TRV11/TRV19/TRV21/TRV29/TRV119/TRV211 3-810-780-23.E