Call Recording; Parking A Call - Cisco 7940 Series Manual

Call Recording

The call record feature either records all calls, records on demand, or records no
calls. This feature is configured by your service provider. Recorded calls are acces-
sible on the web portal under 'Logs'. Play will be next to the corresponding call log.
To record a call on demand you must first allow the call to be answered. The press
[Record]. Please note that when you start a recording you may not stop a recording
until that call has ended.

Parking a Call

Parking a call is an advanced hold feature that allows you to place a call on hold
and pick that call up at any other phone on your phone system. To see how to set
up One-Touch Dial parking slots please refer to the Web Portal section of the user
guide.
If you want to...
Place a call in any parking slot
Place a call in a One-Touch Dial
parking slot (1-10).
Resume a call from a parking
slot that you have assigned a
One-Touch Dial
Resume a call from a parking
slot when you have not assigned
a One-Touch Dial
Then...
Press [more] and then press [Park]. This will park the call in
the first available parking slot.
Press the corresponding One-Touch Dial and the call will be
parked in that slot.
Press the corresponding One-Touch Dial and the call will auto
answer on your phone.
Press [more] until you see [PickUp]. Pressing [PickUp]
will give you a display of all calls currently parked and their
corresponding caller ID. Highlight the correct call and press
[GetCall]. You may also type in the corresponding number on
the keypad to retrieve the call (i.e. the call is in slot 2 press '2'
on the number pad).
17