Using Setup Add (for
Use this menu to add setup to the playback video
Display menu 220.
The setup add is factory-set to oFF.
Setup add on/oFF indication
If the setting does not need to be changed, press
the MENU button to close the menu.
Press the SHIFT button to make the setup add on/
oFF indication start blinking, then press the
ADVANCE button to change the setting to on.
Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and display window
returns to the display shown before the VCR menu.
During recording the signal of the image being shot
contains setup add, when it is output from the
camcorder's S VIDEO OUT and MONITOR OUT
During playback, the setup is removed from the output
To have the setup added during playback, set the setup
add to on.
Chapter 5 Adjustments and Settings