Download  Print this page

Sony 300PF Operating Instructions Manual Page 75

Sony digital camcorder operating instructions.
Hide thumbs

Advertisement

5 Clip mode indication
A "CLIP M" or "CLIP C" indication appears when
you use the ClipLink function for recording.
CLIP M: Indicates shooting in Mark mode
CLIP C: Indicates shooting in Cue mode
6 Clip remaining indication
The number of available clips is displayed when you
use the ClipLink function for recording.
7 Status display area
One of the following values or messages is displayed
to indicate the camcorder's current status or its
operation status.
• New values when changing camcorder's settings
• Messages indicating progress or results of
adjustments
• The camcorder's current settings
• SetupLog data recorded to tape during shooting (see
page 90)
8 EZ FOCUS indication
This appears when the EZ FOCUS button is pressed,
enabling the "easy focus" function.
Note
The status indication is not shown while this indication
appears.
9 LOW LIGHT indication
This warning appears if the lighting level is
inadequate.
!º Audio recording level indicators
These show the recording levels of audio channels 1
and 2.
Channel 1
Channel 2
–2 dB
0 dB
!¡ Tape remaining indication
This shows the tape remaining as follows.
Indication
F-30
30-25
25-20
20-15
15-10
10-5
5-0
5-0 (flashing)
!™ VCR warning indication
This shows warning indications about operation or
status of the VCR.
Indication
Meaning
NO TAPE
There is no tape loaded.
REC INHIBIT
The tape is in the recording inhibited
state.
The battery is almost exhausted.
LOW BATT
The battery is exhausted.
BATT END
TAPE NEAR END
The tape is near the end.
TAPE END
The tape is at the end.
SERVO
The servo lock has been lost.
HUMID
There is condensation.
RF
The video heads are clogged, or there
is some other fault in the recording
system.
The tape is not wound properly.
SLACK
MP TAPE
An incorrect type of cassette has been
loaded. (The cassette is automatically
ejected and the indication disappears
in about two seconds.)
CLIP DATA ERR
Abnormality of the cassette memory
data.
AUDIO 48kHz
At back space editing, you are
(4 flashes/s)
switching from 32 kHz audio recording
mode (4-channel mode) to 48 kHz
audio recording mode (2-channel
mode).
AUDIO 32kHz
At back space editing, you are
(4 flashes/s)
switching from 48 kHz audio recording
mode (2-channel mode) to 32 kHz
audio recording mode (4-channel
mode).
ERROR:91-13F
Failure in loading or saving the
cassette memory data.
Chapter 4 Viewfinder Screen Indications and Menus
Tape remaining
At least 30 minutes
25 - 30 minutes
20 - 25 minutes
15 - 20 minutes
10 - 15 minutes
5 - 10 minutes
2 - 5 minutes
0 - 2 minutes
(Continued)
75

Advertisement

Table of Contents

   Related Manuals for Sony 300PF

Comments to this Manuals

Symbols: 0
Latest comments:
  • TP SINGH Jan 23, 2015 11:04:
    I M INTRESTED TO KNOW ABOUT THIS CAMERA